Now that is all setup you will need to make sure the vinyl plotter is setup.
#Creation pcut usb drivers serial
Change the Output Device to the serial (COM) port you’re using it should look something like this: Next you will need to click on “comm settings” you shouldn’t have to change anything but just make sure they are the same as the following: In the manual that comes with the PCut CT 630 it says you should set the Baud rate to 19200 but I couldn’t get it working at that speed. Now open Sign Blazer and go to the cutter preferences, the Cutter should be “Creation pcut ct 630”. Sign Blazer only sees the first few serial ports so if the one you want to use is over 5 you will have to right click and go to properties the go to the advanced port settings and change it to something lower. Which should look something like this? From here you need to click on “Ports (COM & LPT)”, this will should you all your serial (COM) and parallel (LPT) ports. If you right click on my computer and then click on manage this will bring up the Computer Management Window in the left column you will need to click on device manager. In the guide i will be setting up a Creation pcut ct 630 but the same steps work with the pcut cto 630, the pcut cto 630 is a newer version of the pcut ct 630 To setup the Creation pcut ct 630 using the serial connection you first need to make sure your serial port is working on your PC or laptop.
#Creation pcut usb drivers software
The program I’ve had most success with is Sign Blazer, it isn’t the best looking software but it does the job. First thing it has usb port but I have never had any luck with it, a quick search on Google shows that most people use the serial port anyway. Pcut ct 630 The Creation pcut ct 630 and Creation pcut cto 630 are good vinyl plotters for the price but it isn’t the easiest thing to setup.
0 kommentar(er)
